AirFit™ N10 Nasal CPAP Mask with Headgear
ResMed takes lightweight and innovative features to the next level with the AirFit™ N10 Nasal CPAP Mask with Headgear. Building on the success of the AirFit™ line, the N10 adds an innovative magnet headgear connection and unique frame design.
Manufactured by ResMed.
Many have seen something new and had “Why didn’t I think of that?” pop into their head. The magnetic headgear clips of the AirFit™ N10 Nasal CPAP Mask with Headgear has done just that to many who have seen them. These, along with other features make this a compact, easy to use option. This is a nasal mask which covers both nostrils entirely.
- Magnetic Headgear Clips
- Minimal Contact Points
- Circular Venting
- Spring Air™ Dual-Wall Cushion
- SoftEdge™ Headgear
- Soft Wraps Included
Magnetic Headgear Clips
Magnets lie inside the headgear clips and frame of the AirFit™ N10. Once looped through, the headgear is only a snap away from being connected. This makes taking the mask off and placing back on during the night that much easier. Worried about the magnet slipping off while in use? No worries needed, there is a lip on the opposite side of the clip, keeping it in place even under the tightest headgear configurations. The magnets fall under FDA standards as safe for use.
Spring Air™ Dual-Wall Cushion
The AirFit™ N10 nasal cushion has a dual wall system which promotes consistency. The outer wall seals while the inner wall stabilizes. It features a clip which is used to quickly release the cushion from the mask frame. The N10 mask is available in two cushion size configurations: standard or wide. Please choose desired size when ordering.
Minimal Contact Points
The upper arms of the AirFit™ N10 frame are designed in a curved pattern which hover over the cheeks, allowing for minimal contact with the face. Line of sight is clear with the exclusion of a bulky forehead support. The N10 and N10 For Her both use the same frame and it is compatible with all three sizes of cushion: small, standard, and wide.
The N10 frame has a ring of small exhalation ports which directs the air in various directions away from the user and bed partner. The number of ports provides a quiet experience.
The included SoftEdge™ headgear aims to provide a comfortable, stable fit and promote a proper seal. The softness of the headgear reduces the chance of red marks developing. The headgear can be adjusted at four points for optimal fit. The crown strap which sits on top of the head adds stability to help maintain cushion placement. The AirFit™ N10 headgear is gray on the outer side and light blue on the inner side.
Soft Wraps Included
Soft wraps are included with the AirFit™ N10 and are placed over the clear silicone frame. The soft wraps add comfort if the frame should rest on the cheeks while sleeping on the side.
Looking for a female version for smaller faces? Have a look at the AirFit™ N10 For Her Nasal CPAP Mask with Headgear.